|

The 7th European Symposium on nano-mechanical Testing
5. - 7. September 2006
in Hückelhoven / Germany
organized in collaboration with 
Symposium
Programme
Tuesday, September 5th,
2006
| 2:00 p.m. |
SURFACE Customer
Meeting |
| 6:00 p.m. |
Welcome Reception |
Wednesday, September 6th, 2006
***** Nanomechanics in Medicine
*****
| 9:10 a.m. |
Nano-indentation of biological
materials: Emphasis on teeth
|
| |
Michael Swain /
University of Sydney, Australia
(invited lecture, video)
|
| 10:10 a.m. |
Abrasion tests on human enamel under wet
and dry condition |
| |
Griselda Guidoni /
University of Leoben, Austria
|
| 10:30 a.m. |
A comparison of the nanomechanical
properties of hyaline and repair cartilage |
| |
Oliver Franke /
University of Erlangen, Germany
|
| |
|
10:50 a.m. – 11:20 a.m. coffee
break
***** MEMS, micro- and nanomaterials
*****
11:20 a.m.
|
Comparative study of the rheological
properties of UV-LIGA-Nickel as determined by
indentation combined with inverse methods, microtensile and
micro-compression tests |
| |
Patrick Schwaller
/ EMPA, Thun, Switzerland
|
| 11:40 a.m. |
Micromechanical testing of elastomers and
MEMS structures |
| |
Warren Oliver / MTS
Nanoinstruments, Oak Ridge, TN, USA
|
12:00 p.m. – 1:00
p.m. Lunch
***** Experiments and related Modeling in
nanomechanical testing *****
| 1:00 p.m. |
Model of a superlattice indentation
|
| |
Zygmunt Rymuza /
Warsaw University of Technology, Poland
|
1:20 p.m.
|
Yield strength of pliant and porous
coating materials under complete analytical
consideration of the substrate effect |
| |
Matthias Herrmann
/ TU Chemnitz, Germany
|
| 1:40 p.m. |
Extraction of viscoelastic material
properties taking the real tip geometry into account |
| |
Andreas Jäger
/ TU Wien, Austria
|
| 2:00 p.m. |
Assessing gradient theory at the Micron
and Nano Scales |
| |
Elias Aifantis /
University of Thessaloniki, Greece
|
2:20 p.m. – 2:50 p.m. coffee
break
| 2:50 p.m. |
Image correlation and tracking
techniques
for strain measurements on the micron-scale
|
| |
Christoph Eberl /
JHU Baltimore, MD, USA
(short invited lecture, video)
|
3:20 p.m. – 4:20 p.m Poster
Session & Coffee break
***** Viscoelastic Materials
*****
| 4:20 p.m. |
Nanoindentation behavior and mechanical
properties measurements of polymeric
materials |
| |
Robert F. Cook / NIST,
USA
(invited lecture, video)
|
| 5:20 p.m. |
Soft polymer mechanics investigated by
nanoindentation and in-situ testing |
| |
Julia Deuschle / MPI for
Metals Research, Stuttgart, Germany
|
| 5:40 p.m. |
Screening of EPDM curing states using
nano-indentation |
| |
Hans Kranenburg /
Eindhoven University of Technology, Netherlands
|
6:00 p.m. – 6:20 p.m. coffee break
***** Nanomechanical Tools for Exploring
Biology *****
6:20 p.m.
|
Detection of functional states of
molecularly
imprinted thin films with multi-cycling
nanoindentation |
| |
Joseph J. Belbruno / Dartmouth College, Hanover,
NH, USA
|
| 6:40 p.m. |
Mechanical properties of biotools and
their dependence on wet or dry state |
| |
Thomas Schöberl
/ Erich Schmid Institute, Leoben, Austria
|
| 7:30 p.m. |
Shuttle to Conference
Dinner |
Thursday, September 7th,
2006
***** Applied Materials *****
| 8:40 a.m |
Round Robin on Polycarbonate |
| |
Alexander Karbach /
Bayer, Krefeld, Germany
|
9:00 a.m.
|
Investigation of the viscoelastic
properties of SU8
photo resist at different stages of processing by
nanoindentation creep and stress relaxation tests |
| |
Kirsten Ingolf
Schiffmann / IST, Braunschweig, Germany
|
| 9:20 a.m. |
Nanomechanical investigation of SiNO
coatings
on Si and on steel substrates |
| |
Peter M. Nagy /
CRC, Hungarian Academy of Science, Budapest, Hungary
|
9:40 a.m.
|
Getting accurate nanoindentation data from
zinc: Time dependent and microstructural effects |
| |
Reza Rastegar Tohid
/ University Newcastle Upon Tyne, U.K
|
| 10:00 a.m. |
Indentation-induced densification of
soda-lime silicate glass |
| |
Satoshi Yoshida /
The University of Shiga Prefecture, Hikone, Shiga,
Japan
|
10:20 a.m. – 10:50 a.m. coffee
break
***** Novel Applications and measuring
techniques *****
| 10:50 a.m. |
Nanothermal analysis (nano-TA) at
sub-100 nm spatial resolution |
| |
Michael Reading /
University of East Anglia, Norwich, U.K.
|
| 11:10 a.m. |
Bulge testing of thin films in an
atomic force microscope |
| |
Elmar Schweitzer /
University of Erlangen, Germany
|
11:30 a.m.
|
In situ electrochemical
nanoindentation: A novel method for study of chemomechanical
effects |
| |
Afrooz Barnoush /
University Saarbrücken, Germany
|
| 11:50 a.m. |
High sensitivity nano scale mapping
of elastic moduli |
| |
Yaniv Ganor / Technion,
Haifa, Israel
|
| 12:10 p.m. |
The impact of ion implantation on
mechanical properties of MgO studied by
nanoindentation |
| |
Bodo Wolf / FH
Lausitz, Senftenberg, Germany
|
12:30 p.m. – 2:00
p.m. Lunch
***** Nanotribology *****
| 2:00 p.m. |
Friction and plasticity at the atomic
scale |
| |
Roland Bennewitz / McGill
University, Montréal, Quebec, Canada
|
| |
(invited lecture, video)
|
| 3:00 p.m. |
Nano-wear test on polymer-CNT
composite |
| |
Dora Aranyi / CRC,
Hungarian Academy of Science, Budapest, Hungary
|
| 3:20 p.m. |
Closing and Farewell |
Poster Session:
September 6th, 2006, 3:20 p.m.
Poster Format; A0 Portrait (841 x 1189
mm)
| 1) Gradient Plasticity and Nanoindentation
Near Grain Boundaries |
|
Katerina Aifantis /
University of Thessaloniki, Greece
|
| |
|
2) Application of different
evaluation methods in hardness of a-C:H films on polymer
and silicon substrates with nanoindentation.
|
|
Ruben Bartali /
ITC-IRST, Povo-Trent, Italy
|
| |
| 3) Characterization of the deformation and disruption
behavior of single microorganisms |
|
Judith Hölzer / TU
Braunschweig, Germany
|
| |
| 4) Mechanical properties of nanostructured polymer
particles for anisotropicconductive adhesive |
|
He Jianying /
Norwegian University of Science and Technology,
Trondheim, Norway
|
| |
| 5) Nanomechanical studies of ultrathin polymeric
resist films |
|
Adam Koszewski / University
of Technology, Warsaw, Poland
|
| |
| 6) Deviations from the Nix-Gao
model |
|
Rester Martin /
Erich Schmid Institute, Leoben, Austria
|
| |
7) Investigations of the mechanical properties of
semiconductors by the method of
nanoindentation with
complementary simulations |
|
Ferenc Molnar / TU
Chemnitz, Germany
|
| |
| 8) Nanomechanical studies of MEMS
structures |
|
Marius Pustan /
University of Technology, Warsaw, Poland
|
|